GERMANY Dunker Motor
1.Apply the SLM Controller Area Net-work bus techniques and the optical fiber ,which have "Equipment Fault Diagnosis Method" ability and improve the the data transmit and exchange between sensor, microcontroller, and other electronic equipments.
2. Adopt the imported ST,NXP chips and Philip components and SLM Control Program
3. Equipped with BEDIS control panel
4. The motor device has optical encoder which can control the door working more accurately
1. The hardware system apply the RECORD 16STA materials. The roller track with adhesive foam tape to absorb the carriage movement vibration. The Carriage adopts the unique rubber to reduce the noise and static electricity. Meanwhile, the anodized aluminum idle roller also can reduce the noise
2. Thanks to the track's design ,there is almost no noise when door work. Don't like the normal door operator ,you need to adjust the speed and buffer speed to a value ,then the door can work smoothly.
3. The 36V,100W bruth motor with high torque 3400r/min ,Max speed 70cm/s with little noise lower than 30db
1.CANbus can promise the door 's electronic components work alone relatively . One issues can affect the others and can diagnose the issue to remind you to make a repair
2.Backup battery can promise the door' longer working if power fail or fire
3. If fire ,the door will out-of-lock for people to escape
4. BEA photocell to prevent people from clipping
1. RECORD hardware system to promise the door's working stably
2. Imported sensor to guarrentee the door's open and close safety
3. 5mm thickness, modularization design of track to promise hold more weighted door leaves like 250KG and hanger a second motor device
4. The door can install at 3-4m height